Ta oglas ni aktiven.
Prebrskaj podobne oglase.
Osnovne informacije
- Lokacija
- Jugovzhodna Slovenija
- Stanje
- rabljeno
Opis oglasa
Prodam laser za nadgradnjo na graviri stroj.
Potrebna priklučitev napajanja 12V AC ali DC.
prodam zaradi neuporabe.
Specification:
- Wavelength:445nm~450nm
- Output Power:1000mW~1200mW
- Adjust the focus:Yes(By fingers),1A;
- TTL:Yes,+ and -,please see picture;
- TTL signal input 0~5V input.(0V OFF/5V ON)(TTL Modulation control the output beam OFF / ON )
- Outer driver board:working more steady than inner driver board;
- Frequency for TTL control:0-20KHz;
- Duty cycle:input 1%-100%;
- Cooling mode:Heatsink and Fan
- Shell Material:Metal(Aluminum)
- Lens:Glass
- Circuit control:constant;
- Reverse polarity protection:with automatic identification of positive and negative;
- Red cable at "+",Black cable at "-";
- Size:Laser Module:length 65mm*wide 33mm *high 33mm;
- Size:Driver board:length 72mm*wide 36mm *high 21.5mm;
Potrebna priklučitev napajanja 12V AC ali DC.
prodam zaradi neuporabe.
Specification:
- Wavelength:445nm~450nm
- Output Power:1000mW~1200mW
- Adjust the focus:Yes(By fingers),1A;
- TTL:Yes,+ and -,please see picture;
- TTL signal input 0~5V input.(0V OFF/5V ON)(TTL Modulation control the output beam OFF / ON )
- Outer driver board:working more steady than inner driver board;
- Frequency for TTL control:0-20KHz;
- Duty cycle:input 1%-100%;
- Cooling mode:Heatsink and Fan
- Shell Material:Metal(Aluminum)
- Lens:Glass
- Circuit control:constant;
- Reverse polarity protection:with automatic identification of positive and negative;
- Red cable at "+",Black cable at "-";
- Size:Laser Module:length 65mm*wide 33mm *high 33mm;
- Size:Driver board:length 72mm*wide 36mm *high 21.5mm;
- Oglas je objavljen
- 15.11.2019. ob 20:40
- Do poteka še
- oglas je potekel
- Oglas je prikazan
- 319 -krat