Elektroniko za vlečno kljuko

Prodam novo, samo razpakirano univerzalno elektroniko za vlečno kljuko

Več o elektroniki na strani

https://www.umbrarimorchi.it/en/umbra-rimorchi-electrics/10003-kit-c-c.html


Towbar Wiring Kit 13 Pin Universal Towing Electrics C2 Interface Module.

Ultra compact size, quick and easy to assemble.The wires are connected to a plug , this makes save time and possible errors during the assembly stage.
Switch-off of the fog lights system on the vehicle, depending on the model if it has one or two fog lamps, when the trailer or Caravan are connected to prevent reflections and avoid to cut vehicles wires.
Compatible for most vehicles with a 12 and 24 Volts battery.
It detects the inactivity of the electronic module when it is not used, activating a low consumption mode to avoid possible discharges of the battery.
Check Control System based on the use of a led tester.
CE Homologation according to the directive 2004/104/EC.The towbars are designed to fit standard bumpers. This excludes Sport, Titanium, Zetec and variants etc. For Using the tow bars with Alko stabilizer the customer should contact the seller as not all of the tow bars are suitable with Alko. The Images are for illustrative purposes only and are designed to fit the application as advertised. Please be advised that the tow bars are tested to the normal single exhaust and if your vehicle has twin or aftermarket exhaust you should contact the seller for more details. Please note that if the vehicle has a CAN BUS system or LED lights it is advisable to contact your local dealer to check if the universal cabling is suitable for your car or you need to purchase a specific wiring.
The kit has a security fuction, that in case it detects a failure in the turn lamps on the trailer, the module automatically diverts the function to the tail lamp; this security fuction is similar to the substitute lighting system incorporated in some vehicles in their own rear lights.
The kit is based on electronic components of last generation, without the use of mechanical light activations through relay.
The kit has an easy reconfiguration system which can be used on vehicles with fog light activation by mass, such as Chrysler Voyager or Suzuki Vitara.
The kits socket and wires set respect the norm ISO 6722 and it supports temperatures between -40C and +105C.
A low cost eletrical wiring kit that guarantees the same high quality standards of many specific wiring kit.

The Kit Contains:

Universal 13 Pin Wiring Kit
13 pin Pre-wired Socket with 1.5m Cable
C2 Towing Towing Interface Module Unit
Single Mounting Plate & Gasket
3 x Fixing Bolts and Nuts
9 x Snap Connectors / Scotch Locks
2 x Blue Fuse Holders
2 x Fuses
2 x Ring Earth Terminals
7 x Small Zip Ties
2 x Big Zip Ties
1 x Double Sided Tape
1 x Round Plastic Cable Neck
1 x Jumper
4.8m x 28/0.3mm Red Wire
4.8m x 28/0.3mm Red Wire
0.75m x 28/0.3mm White Wire with Terminal and 3 Pin Socket
2.5m x 28/0.3mm Black Wire 7 Pin Socket
Grommet
Fitting Instructions
Please check the Section Item Specifics and Section Vehicle fitment on the listing to ensure that this will fit your vehicle. Do not rely on just the compatibility checker. If you have any doubt please contact us with the details of your vehicle